TESTING EQUIPMENT MANUFACTURER FOR BUILDING CONSTRUCTION INDUSTRY
Cement and Mortar > Mixing and Moulding Equipments - I
MODEL: MIXING AND MOULDING EQUIPMENTS - I
PRODUCT INFORMATION
Electric Pan Mixer (Cement)
This mixer is designed according to BS 4550. Part 3 for the current mixing in order to obtain consistent and repeatable of test result The
motor speed is powerful enough to mix the specimen and does not affect the mix consistency. The mix blade and scrape are spring loaded
to prevent jamming or crushing of sand or stone particle. Timer device is provided with the mixer. Pan Size: 450mm (dial) x 220mm (H) Power: 240V, 50Hz. 1 Phase
BS 4550: Part 3 D 2
Electric Vibrating Machine (Cement)
Designed to suit compaction of 70.7mm mortar specimen according to B S 4550 requirement. The vibrating frequency is 12,000rpm. The
machine supplied with a no 70.7 mould.
BS 4551, ASTM C230 D3
Flow Table (Cement)
Hand Operated Flow Table consist of mould. tamper and base plate
D 3/A
identical as above but with electrical operated.
Power: 240V, 50hz, 1 ph
D 4
Vicat Apparatus, EN 196 -1. BS 12. BS 4550, ASTM
C 187, C 191
Vicat apparatus conforming to above standard with consistency plunger 10mm and EN 196, BS initial set needle 1-13mm (Weight 9gm) EN
l96, BS Final Needle with footing, EN/BS Vicat mould with ring and base plate
D 4/A
Automatic Vicat Apparatus with recorder c/w 100nos charts. 2nos Penetration Needle 1.13mm diameter, 2nos EN 196 mould, glass plate
and pencil.
Our Address
Dubai Office
Falcon Geomatics LLC
Ahammed Kamal Warehouse 6
Street 10C
Ras al Khor Industrial 1, Dubai
United Arab Emirates
Abu Dhabi Office
Falcon Geomatics LLC – Abu Dhabi
Musaffah Industrial Area M40
Plot Number 6 & Building 3
First Floor, Office No. 11 & 12
Abu Dhabi
United Arab Emirates
Quick Contact
Copyright © 2024, Falcon Geomatics LLC – All Rights Reserved.