PRODUCTS> CONCRETE > DIGITAL COMPRESSION TEST (PRESS) MACHINE 4 COLUMN
DIGITAL COMPRESSION TEST (PRESS) MACHINE 4 COLUMN
The Digital Compression Testing Machine with 4 Column is a very Digital Compression common testing method that is used to establish the compressive force or crush resistance of a material and the ability of the material to recover after a specified compressive force is applied and even held over a defined period of time by measuring fundamental variables, such as, strain, stress, and deformation.
There are several models and capacities available for the Digital Compression Test Machine with 4 COLUMN designed to meet the need for reliable and consistent testing of concrete samples.
PRODUCT INFORMATION
DIGITAL COMPRESSION TEST (PRESS) MACHINE (Range: 1200, 1500, 2000, 2500, 3000, 4000kN)
DIGITAL READOUT DHR
The DHR digital readout is microprocessor control instrument which is fitted as a standard to all the Unit Test Machines. The load is displayed in kN / lbs /kgf, which can be enlarged 4 times larger in the LCD display for better clear view.
DIGITAL SPECIFICATION
- Dual Range 2 Channel Compression and Flexural Mode 0-400kN x 0.1kN, 400-2000kN x 1kN for Compression Channel, 0-100kN x 0.01kN for Flexural Channel
- Force unit suitable either kN, kgf or lbf
- Sample size selectable
- Cube, or Non Standard Cylinder, Non Standard Cube or Beam Block
- Date, time, sample ref., stress (N/mm2), test number, sample size, failure load (kN), pace rate can be viewed on the display and also can download to computer or printer by using RS 232 cable on serial port
- Test result can best stored up to 200 before load to computer or printer
- In kN mode reading. 0.1kN increment up to 400kN and 1kN increment up to 1500, 2000, 2500, 3000, 4000, or 5000kN
- Large 125 x 75mm screen LCD Display
- Pace rate selection from 0.1 to 5kN/S
- Calibration through pass code
- Maximum load hold and reset auto calculation
- in N/mm2 (Mpa);p.s.i or kg/cm2
- Accuracy: Better than +1% over the calibrated range
AD 150/EL, AD 2000/EL, AD250/EL DHR Digital Readout Machine (4 column or Slab Frame)
These machines are designed to allow testing of cylinder up to 320mm long x 160mm diameter and cube 150, 100mm square specimen. The mortar Cube (ASTM C109) 50mm also can be tested by using optional Compression Jig attachment fitted to all range of Unit Test’s Compression Test Machine.
GENERAL SPECIFICATION
Model: | AD 150/EL | AD 200/EL | AD 250/EL | AD 300/EL | AD 400/EL | AD 500/EL |
Capacity (kN): | 1500 | 2000 | 2500 | 3000 | 4000 | 5000 |
Low Range Sensitivity (kN): | 0-400 x 0.1 | 0-400 x 0.1 | 0-400 x 0.1 | 0-400 x 0.1 | 0-600 x 0.1 | 0-600 x 0.1 |
High Range Sensitivity (kN): | 400-1500 x 1 | 400-2000 x 1 | 400-2500 x 1 | 400-3000 x 1 | 600-4000 x 1 | 600-5000 x 1 |
Flexural Range (Optional Frame): | 0-100 x 0.01 or 0-50 x 0.01 | |||||
Max. Ver. Clearance (mm): | 320 | |||||
Max. Horizontal Clearance (mm): Slab/Column Frame | 280/200 | 310/210 | 310/210 | 360/240 | 395 | 430 |
Ram Travel (mm) | 50 | |||||
Approx Weight (kg): | 600 | 850 | 1000 | 1600 | 2000 | 3000 |
Overall Dimension (mm): | 800 x 600 x 1300 (H) | 800 x 600 x 1300 (H) | 800 x 600 x 1300 (H) | 800 x 600 x 1400 (H) | 800 x 600 x 1600 (H) | 800 x 600 x 1700 (H) |
Power: | 240V, 50Hz, 1pH | |||||
Our Address
Dubai Office
Falcon Geomatics LLC
Ahammed Kamal Warehouse 6
Street 10C
Ras al Khor Industrial 1, Dubai
United Arab Emirates
Abu Dhabi Office
Falcon Geomatics LLC – Abu Dhabi
Musaffah Industrial Area M40
Plot Number 6 & Building 3
First Floor, Office No. 11 & 12
Abu Dhabi
United Arab Emirates
Quick Contact
Copyright © 2024, Falcon Geomatics LLC – All Rights reserved