PRODUCTS > CONCRETE > CURING OF SPECIMENS

CURING OF SPECIMENS

The Curing of Specimens is a very common testing method that is used to establish the compressive force or crush resistance of a material and the ability of the material to recover after a specified compressive force is applied and even held over a defined period of time by measuring fundamental variables, such as, strain, stress, and deformation.

There are several models and capacities available for the Curing of Specimens designed to meet the need for reliable and consistent testing of concrete samples.

PRODUCT INFORMATION

CURING OF SPECIMENS
BS EN 12390-2, ASTM C192, ASTM C31, AASHTO T23

C 27-1
Concrete Curing Tank

Used for curing of concrete samples made from. It is made from mild steel and able to accept up to 200 numbers of
150 mm concrete cubes. Optional temperature controller and stirrer are available. Comes with water outlet release valve.
Dimensions: 610(H) x 1219 (W) x 1219(L) Weight:25 kg approx.

C 27-2
Concrete Curing Tank

Used for curing of concrete samples made from. It is made from mild steel and able to accept up to 800 numbers of
150 mm concrete cubes. Optional temperature controller and stirrer are available. Comes with water outlet release valve.
Dimensions: 1219(H) x 2438(L) x 1219mm (W) Weight;50 kg approx.

C 28
Analog Thermostat Concrete Curing Tank

Used for curing of concrete samples fitted with analog thermostat, circulation pump, immersion heating element, base rack and water release outlet valve. Made from zinc coated steel sheet. Able to accept up to 64 numbers of 150 mm cubes and maximum water temperature up to 80″c. Dimensions:1500(L) x750(W) x 750mm(H) Weight: 120 kg approx. Power: 220-240 VAC,50-60 Hz, 1 phase,2000W

Accessories:

C 29
Specific Gravity Frame (Buoyancy Balance)
BS 812, ASTM C128, BS EN 12390-7

Used for specific gravity determination of concrete and aggregates. Consists of a steel frame fitted with a water container of adjustable height. An optional 15 kg x O.1 g digital balance is available with bottom hook and a cradle for holding testing specimens.
Dimensions :550 x 550 x 1200 mm (H) approx.

Weight : 60 kg Approx.

Our Address

Dubai Office

Falcon Geomatics LLC
Ahammed Kamal Warehouse 6
Street 10C
Ras al Khor Industrial 1, Dubai
United Arab Emirates

Abu Dhabi Office

Falcon Geomatics LLC – Abu Dhabi
Musaffah Industrial Area M40
Plot Number 6 & Building 3
First Floor, Office No. 11 & 12
Abu Dhabi
United Arab Emirates

Copyright © 2020, Falcon Geomatics LLC – All Rights reserved

Call Now Button