PRODUCTS > CONCRETE > CONCRETE IMPERMEABILITY AND INITIAL SURFACE ABSORPTION TEST

CONCRETE IMPERMEABILITY AND INITIAL SURFACE ABSORPTION TEST

The Concrete Impermeability and initial Surface Absorption Test is a very common testing method that is used to establish the compressive force or crush resistance of a material and the ability of the material to recover after a specified compressive force is applied and even held over a defined period of time by measuring fundamental variables, such as, strain, stress, and deformation.

There are several models and capacities available for the automatic Concrete Concrete Impermeability and initial Surface Absorption Test  designed to meet the need for reliable and consistent testing of concrete samples.

PRODUCT INFORMATION

C21 
Initial Surface Absorption Test (ISAT)
BS 1881 :Part 208

Used for measuring permeability and absorption of concrete. Consists of capillary tube with scale, water reservoir and 
connection tubing mounted on a stand. 2 numbers of clear plastic caps with rubber gaskets are provided for smooth and rough concrete surface. Weight: 1.2kgapprox

C22
Pocket Concrete Penetrometer
ASTM C403, UNI 7123, AASHTO T197

Used to evaluate the initial set of concrete mortar, suitable  for laboratory and site. The penetration plunger has a tip area   of 32 mm2, slowly pushed into the mortar to a depth of 25.4 mm  indicated on the shaft. The resistance units are in kpa and lbf/in’z indicated by a maximum load indicator. The graduated scale is up to 4800 kpa and 700 lbf/in2 Weight: 400 g approx

C23
Concrete Penetrometer
ASTM 0103, UNI 7123, UN! 7927, AASHTO T197

Used to determine the setting time of the mortar fraction of concrete mixes. Consists ofa spring type penetrometer with six interchangeable stainless steel needle points. A ring indicates  the force value on the penetrometer. Supplied complete with  carrying case.
Weight: 5 kg approx

Our Address

Dubai Office

Falcon Geomatics LLC
Ahammed Kamal Warehouse 6
Street 10C
Ras al Khor Industrial 1, Dubai
United Arab Emirates

Abu Dhabi Office

Falcon Geomatics LLC – Abu Dhabi
Musaffah Industrial Area M40
Plot Number 6 & Building 3
First Floor, Office No. 11 & 12
Abu Dhabi
United Arab Emirates

Copyright © 2020, Falcon Geomatics LLC – All Rights reserved

Call Now Button