Asphalt Testing Equipment's > Bitumen Contect Oven - Ignition Method (A-030/IGN)
- Used to determine the bitumen/binder content in the asphalt and hot-mix samples.
- “After Burner” unit is installed at the top of the oven to reduce the gas emission during the test.
- The Maximum Temperature for the oven chamber is 600°C.
- The Maximum Temperature for the After-Burner unit is 950°C.
- The Maximum Temperature for the After-Burner unit is 950°C.
- The Bottom of the innerchamber is made of insulating bricks with high strength against abrasion and impacts.
- The Sides of the inner chamber with the ceiling lid are made of fiber board to provide better thermal insulation.
- The Outer case is made of galvanized steel.
- The 7” True-Flat-Touch control panel is very user friendly and programmed to display the results graphically and in real-time during the test.
- Equipped with a Sample plate and holder made of Nichrome.
- Weighing system (Capacity: 4 kg / Readability: 0.1 kg) is integrated in the oven.
- The Oven is equipped with a thermal printer for faster/easier result reporting.
Technical Specifications
Supplied With
- Chamber Maximum Temperature: 600°C.
- After-Burner Maximum Temperature: 950°C.
- Inner made of insulating bricks &fiber board.
- Outer Made of Galvanized Steel.
- After-Burner Unit.
- 7” Touch LCD Control Panel.
- Thermal Printer.
- Built-in Weighing System (Capacity: 4 kg / Readability: 0.1 kg).
- Sample Plate & Sample Holder.
Our Address
Dubai Office
Falcon Geomatics LLC
Ahammed Kamal Warehouse 6
Street 10C
Ras al Khor Industrial 1, Dubai
United Arab Emirates
Abu Dhabi Office
Falcon Geomatics LLC – Abu Dhabi
Musaffah Industrial Area M40
Plot Number 6 & Building 3
First Floor, Office No. 11 & 12
Abu Dhabi
United Arab Emirates
Quick Contact
Copyright © 2020, Falcon Geomatics LLC – All Rights reserved