Cable Locators

Detection > Cable Locators > Detection Accessories

Detection Accessories

Making cable avoidance, locating and tracing easier and more efficient

Leica DA Signal Transmitters

The Leica Digisystem accessories extend the applications and scope of the DIGICAT cable locators and DIGITEX signal transmitters. The accessories help improve the detection and tracing of buried utilities, which may carry only a poor signal or no detectable signal, they can also be used to locate some non-metallic utilities.The Leica DA signal transmitters apply a signal onto underground cables or pipes that may not carry a detectable signal. The Leica DD SMART cable locators can then be used to locate the signal from the Leica DD signal transmitter.

Digitrace

Makes locating small, non-metallic drains, ducts or pipes quick and easy and is available in 30, 50 or 80 metre lengths. The Digitrace rod can be inserted and pushed along the buried utility under investigation when connected to a DIGITEX signal transmitter and the signal traced on the surface by a DIGICAT cable locator.

MAXiSONDE (8kHz & 33 kHz)
A 55mm dual frequency sonde can be used to trace deep lying drains, sewers and other non-conductive utilities. It acts like a signal transmitter, can be attached to a wide range of equipment and has a depth range of 12 metres.

Digimouse (8 kHz & 33 kHz)

A compact dual frequency sonde that can be used to trace drains, sewers and other non-conductive utilities. It acts like a signal transmitter, can be attached to a wide range of equipment and has a depth range of 5 metres.

Multi-Clamp (512 Hz, 640 Hz, 8 kHz, 33 kHz)This 80mm clamp is the ideal solution for highly congested underground areas, where you are trying to locate a specific utility. To be used in conjunction with a DIGITEX signal transmitter.

Signal Clamp (33 kHz)This 100mm clamp is the ideal solution for highly congested underground areas, where you are trying to locate a specific utility. To be used in conjunction with a DIGITEX signal transmitter.